Most Common Issues With Washers And Dryers

Did you know that 38% of appliance purchases are motivated by the breakdown of an old unit? Replacing your washer or dryer can be expensive and disappointing, especially if you haven’t had the appliance for very long.

 

If you have a broken washer or dryer, don’t worry. You don’t have to replace it immediately. Instead, you can repair and maintain your old unit. Appliance repair can extend your unit’s lifespan while making it more efficient and reliable.

 

Some issues with washers and dryers you can fix yourself, but others require a professional. In this article, we’ll be going over the most common issues you’ll experience, how to troubleshoot them, and when it’s time to bring in an expert! Read on to learn more! 

Your Machine Won’t Start

 

If your washer or dryer isn’t starting there are a few potential causes. If you’ve just used it for a load or two, the machine is probably overheated. The first thing you should try is to give it time to cool down before you run another load. 

 

If that’s not the issue, the seal around the door could be loose. This will prevent the door from closing all the way, and the sensor won’t allow the machine to start. Check the rubber seal around your door and clean any debris that could have built up around the edge. 

 

If your machine still won’t start, it could be an issue with the electricity. Check your circuit breaker and make sure the machine is plugged in. 

 

If your washer still refuses to start, consider reaching out for appliance repair.

 

Your Machine Smells Bad

 

Mould, mildew, and dirt can build up in your washer. This can cause your machine to stink, and that scent can transfer to your clothes.

Wipe down the machine, door seals, and detergent holders. Then, run an empty cycle with hot water and bleach to refresh the unit and bring back a crisp scent. 

 

Your Dryer Is Shaking

 

If your clothes dryer is shaking, it’s usually the result of unbalanced feet or damaged drum seals. If the unit is unbalanced, you can simply adjust the feet to even it out.

However, if the drum seals are worn or damaged, you will need to call a professional to repair or replace them. 

 

Your Washing Machine Isn’t Draining

 

If you have a broken washing machine that’s not draining, it is usually caused by damaged seals and gaskets. Alternatively, you could have a clogged drain hose or a damaged drain pump. 

 

In all cases, you’ll need to bring in a professional for washing machine repairs

 

Your Clothes Are Still Wet

 

If your clothes dryer is not working and your clothes come out wet every time, you might be overloading the machine. Try reducing the load. 

 

If that doesn’t help, clean the lint screen. That said, you should already be doing this after every load. Not only will it make your drier more effective, but it can reduce your risk of a fire

If your clothes are still wet, the culprit is usually a broken heating element or thermal fuse. If that’s the case, you’ll need to call a professional to troubleshoot your broken clothes dryer. 

 

Repair These Washer and Dryer Issues Today

 

The next time you experience one of these common issues with washers and dryers, don’t jump immediately to replace your unit. Instead, you can troubleshoot it and bring it back to life without breaking the bank. All it takes is a little know-how. 

If your washer or dryer resists your best efforts to troubleshoot it, don’t hesitate to reach out to Unit Appliance in Melbourne. Our experienced and certified technicians can fix your machine in no time!

Washing Machine facts

Try not to overdry your clothes in your dryer. It can make them more wrinkled and stiff.

0 Comments

Submit a Comment

Your email address will not be published.